Semi-stand development with Rodinal 1+100
One hour, two agitations and a lot of patience. A practical note on semi-stand, bromide drag, and the developer that outlives every bottle in my cupboard.
Short days, grey light and a roll of HP5 rated at 1600. What happened in the tank, what I would change, and why I keep coming back to push processing every winter.
One hour, two agitations and a lot of patience. A practical note on semi-stand, bromide drag, and the developer that outlives every bottle in my cupboard.
Two and a half years of film in a single binder system, with an index I can actually search. The storage that finally stopped me losing rolls.
A macro lens, a cheap light panel and a film holder made from mount board. The setup that replaced my flatbed, and the mistakes I made on the way.
Before scanning anything I look at each strip on a light box with a loupe. What I look for, and how it tells me whether to blame exposure or development.
Fogged frames, a torch in a dark room and new light seals cut from craft foam. How I traced the leak instead of guessing.
An enlarger bought from a retiring club member, three trays in the bathtub, and the first time a picture appeared on paper under the safelight.
Buying film in thirty-metre rolls and loading my own cassettes roughly halves the cost per roll. Here is how it goes, and what can go wrong.
Two classic 400-speed films, the same flat light, the same developer. The differences are real but smaller than the internet says.